Rescan bank/preset directories, Set current bank as default, Set current preset as default – Teac GigaPulse User Manual
Page 56: Turbomode->puremode (not recommended)
56
GigaPulse
™
User Guide
Gig
aP
uls
e F
ile
M
en
u
GigaPulse File Menu
56
Rescan Bank/Preset Directories
Updates Bank and Preset Directories.
Set Current Bank as Default
Makes the current bank the default bank setting when GigaPulse is initiated.
Set Current Preset as Default
Makes the current preset the new default preset setting when the bank impulse is
loaded.
TurboMode->PureMode (not recommended)
PureMode is a 100% mathematically perfect convolution without the use of an artificial
reverb tail model for up to 3 seconds.
Convolution is very CPU intensive and therefore the default setting (Turbo Mode) is an
effective limit of three seconds of actual convolution at 48 kHz before going into the Tail
Model.
It is very likely that PureMode can be used more in the future, as computers get more
powerful. Until then however, we recommend leaving it set to Turbo Mode. Pure
Mode would mainly be used for ambiences that are longer than three seconds and the
artificial tail model is noticeable.