Teac GigaPulse User Manual

Page 21

GigaPulse

™

User Guide

Gig

uls

e In

ter

GigaPulse Interface

5. Load a third ImpulseSet (i.e. ReplacementPianoBody).

At this time, the latest impulse set that is loaded (i.e. ReplacementPianoBody) is

combined with the preserved model (ReplacementPianoBody+ConcertHall). As you

play notes, you will hear attributes of each…as if your instrument is being played with

the (OriginalPianoBody) removed, the (ReplacementPianoBody) added, and within the

(ConcertHall).

You may continue to tweak the controls and change banks/presets. As long as the

‘Cascade’ button light remains on, your current GigaPulse conﬁguration is being

cascaded with the GigaPulse conﬁguration preserved in steps (1) thru (4).

If desired, you may encode this cascaded GigaPulse conﬁguration to a Gig File using the

‘File’ menu’s ‘Encode Current Cfg to a Gig Instrument’.

6. Repeat steps 4-5 as often as required for your needs.

7. Turn off ‘Cascade Mode’ by clicking on the ‘Cascade’ button.

At this time, all preserved cascade states are removed. You will only hear your

instrument’s notes being played through the current GigaPulse conﬁguration.