Teac GigaPulse - Manual (Page 30)

30
GigaPulse
™
User Guide
Gig
aP
uls
e In
ter
fa
ce
GigaPulse Interface
30
MIC REPLACEMENT:
Different microphones have different recording characteristics. Microphones come
in different quality levels (price will be a clue), and they also have different directional
characteristics (Omni directional, Cardoid, Wide Cardoid, Hyper Cardoid, Figure 8), They
may also give different responses according to the pitch or timbre of the source audio.
To cover all these possibilities, GigaPulse includes a generous selection of Microphone
impulse models. You can use these to remove the characteristics of one microphone
and replace it with the characteristics of another. Note: Processor impulses may also be
used here. “E.G. Boxinator”
Note that using original (inverse) and/or replacement mics (as well as Pattern and Filter
selections) will cause GigaPulse to run pause and run a short calculation when the mic
models are chosen, but they do not require additional CPU when processing audio.
Drop Down Menus:
Original Mic:
Replacement Mic:
GigaPulse gives you a generous choice of microphones. Choose
these using the Drop Down Menus.
Provides a list of microphones that might have been used in
the original recording that is being processed by GigaPulse.
By selecting the appropriate mic, you apply the inverse
impulse response, which effectively removes its character of
the selected mic model from the original audio.
Provides a similar list, but these microphones are used to
replace the original one.
(This is why we have the (inv) at the beginning of the majority of choices.)