Measurement Computing Personal488 rev.3.0 For DOS & Windows 3.Xi - Manual (Page 381)

19. Error Messages IV. TROUBLESHOOTING
IV-366 Personal488 User’s Manual, Rev. 3.0
102 ERROR OPENING DEVICE %s Possible loss of electrical or logical
connection.
103 DEVICE %s CURRENTLY LOCKED BY %s Device is in use by another processor in a
multiprocessing environment. (This
does not refer to multitasking
environments.)
104 TIME OUT ON NETWORK
COMMUNICATIONS
Unable to access a remote communications
device within the time out interval.
105 ERROR: DEVICE IS NOT OPEN Attempt to access a device which has not
been opened or has subsequently been
closed.
106 IPX IS NOT LOADED Unable to access device via network
communications.
107 INTERFACE IS BUSY Remote IEEE 488 interface is busy.
108 TIMER/COUNTER REQUIRES INTERRUPTS
TO BE CONFIGURED
Interrupts are required for proper Driver488
function of this device.
109 INVALID INTERRUPT LEVEL Request interrupt level is not supported by
this hardware.
110 MUST REMOVE DOS NAME FIRST Attempted to remove a Driver488 device
underlying a DOS device.
111 NO WINDOWS TIMERS AVAILABLE Driver488/W31 requires use of a Windows
timer which was unavailable. Close
other applications using Windows
timers and retry.