Measurement Computing Personal488 rev.3.0 For DOS & Windows 3.Xi - Manual (Page 273)

11A. Introduction II. SOFTWARE GUIDES - 11. Driver488/W95
II-258 Personal488 User’s Manual, Rev. 3.0
11. Driver488/W95
Note: Driver488/WIN95 and Driver488/NT from previous manuals, have been renamed
Driver488/W95 and Driver488/WNT, respectively.
Note: The differences among Driver488 for Windows 3.x, Windows 95 and Windows NT are
slight. However, because additional changes are being made to Driver488/W95 and
Driver488/WNT at the time this manual is being revised, refer to your operating system
header file (and
README.TXT text file, if present) to obtain the current material on these
driver versions.
To obtain a detailed description of the command references for Driver488/SUB and Driver488/W31,
turn to Section III in this manual entitled “Command References.” The commands for Driver488/W95
and Driver488/WNT are provided as guides, pending current software revisions. Refer to your
operating system header file for the latest available information specific to your application. The
commands are presented in alphabetical order for ease of use.