Measurement Computing DASYLab - Manual (Page 79)

Appendix C 958095 Cal Notes for DBK19, DBK52, and TemBook/66 C-1
Appendix C Cal Notes for DBK19, DBK52, and TempBook/66
TempBook/66, DBK19, and DBK52 users may wish to use the software calibration file for thermocouple
measurements. To select a file, click on the Calibration button. You will be warned if the file does not exist
or contains invalid values. DBK19 and DBK52 channels will only use the calibration file if the calibration functions> is checked in the DBK Expansion dialog for each DBK card.
The calibration file needs to be configured and located on your hard drive. Refer to the documentation
included with the DBK modules.
To specify the location of the calibration file, double click your acquisition device in the hardware
configuration tree, then click .
Accessing the DBK19/DBK52 Calibration File
To make use of the calibration file:
1. Double-click the DBK19 or DBK52 in the hardware configuration tree, as applicable.
Example of Selecting the Calibration Function for use with DBK19
2. Click the Use Calibration Function check box.
These settings are saved in the Configuration File, but not with the worksheet.