Measurement Computing DASYLab - Manual (Page 12)

1-8 Daq, WaveBook, & Personal Daq/3000 Series Devices 977391 DASYLab –Enhanced Driver
7. If you did not receive the version listed on your purchase order, contact IOtech’s Technical Support
Department at [email protected].
8. Click to close the “Information about DASYLab” window.
This completes the software installation process. At this point you can access DASYLab Help via the Help pull-down
menu; or access device-specific help as discussed below.
To access IOtech Device-specific help:
1. Open the Measurement pull-down menu in DASYLab (see preceding figure).
Note: In earlier versions of DASYLab the pull-down menu is labeled Experiment and the sub-menu item for
Measurement Setup is labeled Experiment Setup.
2. Select Hardware Setup.
3. Select Driver.