Measurement Computing DASYLab - Manual (Page 7)

DASYLab – Enhanced Driver
977391 Daq, WaveBook, & Personal Daq/3000 Series Devices 1-3
Software Installation
To use the Enhanced IOtech Driver for DASYLab, several layers of application and driver software are required as
outlined in the figure below.
The Enhanced DASYLab driver installation program installs all required software components onto the target
computer, except for the DASYLab application itself. However, there are still several steps to complete before
DASYLab and the hardware is ready to use on the computer, as outlined below.
Install DASYLab Application
1. Launch DASYLab installation from the DASYLab CD. Note that the CD should auto-start.
If the CD does not auto-start, run start.exe from the CD.
2. From the DASYLab splash screen, select “Install DASYLab.”
3. When prompted for your name, company and serial number, enter the requested data. Obtain the serial
number from the CD jacket. Keep the number in a safe place for future installations and upgrades.
4. When prompted for the installation directory and program folder, use the default selection, or choose another.
We recommend that the default directory and location be used.
5. When prompted for Setup Type, choose from the available options.
We recommend that you select Typical.