Measurement Computing DASYLab - Manual (Page 19)

DASYLab – Standard Driver 876994 Configuring DASYLab for PointScan 3-1
Configuring DASYLab for PointScan 3
Overview …… 3-1
IOtoolKit …… 3-2
Install the IOtoolKit …… 3-2
Reserve Addresses …… 3-2
Ethernet Configuration …… 3-2
Configure the System via the IOtoolKit …… 3-4
KEPServerEx …… 3-5
Install the KEPServerEx Software …… 3-5
Configure KEPServerEx …… 3-5
DASYLab …… 3-6
Install DASYLab …… 3-6
Connect DASYLab to the OPC Server …… 3-7
Software Support Structure
Overview
This chapter covers the steps necessary for a successful installation of DASYLab for use in PointScan
applications. The chapter sections are presented in chronological order, as indicated in the table of
contents above.
In order to complete all steps successfully, you will need the following at, or above, the indicated version
level.
• IOtoolKit Installation CD, version 1.2 (p/n 1075-0601)*
• KEPServerEx, version 4.0 (included on the IOtoolKit CD)*
• DASYLab Installation CD, version 6.0 (p/n 472-0606)*
• Internet Explorer, version 5.0*
• PointScan/104, PointScan/204, & PointScan/443 Power Supply
*The version numbers indicated are the lowest version levels required to ensure a successful
installation of DASYLab for PointScan applications.