Measurement Computing DASYLab - Manual (Page 32)

4-4 IOtech 640 & 650 Series Devices 977491 DASYLab –Enhanced Driver
6. Select: Enhanced Driver [Daq1000/2000/3000 Series, WaveBooks, 600 Series
See preceding figure.
7. Follow the installation wizard configuration screens until setup is complete.
Using the Daq Configuration Control Panel Applet (for 640e and 650e)
IOtech 640e and 650e must be installed into the operating system by using the Daq* Configuration control panel applet.
1. The Control Panel is accessed through the Windows Start Menu.
Windows Vista Users: A file called daqxcpl.exe must be used if you want Windows Vista
compatibility. After installing software from the IOtech CD [or from our website (www.iotech.com)];
you can access the daqxcpl.exe file by navigating from the Windows Desktop as follows:
Start menu

Programs

DASYLab Support Drivers

DaqX Configuration Utility
2. Add and configure your data acquisition device in the control Daq Configuration Control Panel Applet. Refer to the
data acquisition user’s manual for instructions on using the applet and configuring device names.