Measurement Computing CB-COM-7021 - Manual (Page 60)

60
CB-7021, CB-7022, CB-7024 User’s Manual
2.27 ~AA1
Description:
Reset Module Status
Command:
~AA1[CHK](cr)
~ Delimiter character
AA Address of setting module (00 to FF)
1 Command for reset module status
Response:
Valid Command:
!AA[CHK](cr)
Invalid Command:
?AA[CHK](cr)
Syntax or communication error may not get a
response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of response module (00 to FF)
Example:
Command: ~010
Receive: !0104
Read address 01 module status, returns 04, host watchdog
timeout flag is set.
Command: ~011 Receive: !01
Reset address 01 module status, returns successful.
Command: ~010 Receive: !0100
Read address 01 module status, returns 00, Module Status is
clear.
Related Command
:
Sec. 2.25,
~**; Sec. 2.26, ~AA0
Related Topic
:
Sec. 3.2,
Module Status; Sec. 3.3, Dual Watchdog Operation