Measurement Computing CB-COM-7021 - Manual (Page 38)

38
CB-7021, CB-7022, CB-7024 User’s Manual
2.9 $AA1
Description:
Perform 20 mA Calibration
Note
: The command is for CB-7021/21P only.
Syntax:
$AA1[CHK](cr)
$ Delimiter character
AA Address of setting module (00 to FF)
1 command for performing 20 mA calibration
Response:
Valid Command:
!AA[CHK](cr)
Invalid Command:
?AA[CHK](cr)
Syntax error or communication error may get no
response.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of response module (00 to FF)
Example:
Command: $011
Receive: !01
Perform address 01 20 mA calibration, returns successful.
Related Command
:
Sec. 2.8
$AA0, Sec. 2.10 $AA3VV
Related Topics
:
Sec. 1.9
Calibration