Measurement Computing CB-COM-7021 - Manual (Page 52)

52
CB-7021, CB-7022, CB-7024 User’s Manual
2.21.1 $AA7N
Description:
Perform 10V Calibration for Channel N
Note
: The command is for CB-7022 only.
Syntax:
$AA7N[CHK](cr)
$ Delimiter character
AA Address of reading module (00 to FF)
7 command for performing 10V calibration
N channel to calibrate (0 to 1)
Response:
Valid Command:
!AA[CHK](cr)
Invalid Command:
?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of response module (00 to FF)
Example:
Command: $0170
Receive: !01
Perform address 01 channel 0 10V calibration, returns
successful.
Related Command
:
Sec. 2.16,
$AA0N, Sec. 2.17, $AA1N
Related Topics
:
Sec. 1.9,
Calibration