Measurement Computing CB-COM-7021 - Manual (Page 42)

42
CB-7021, CB-7022, CB-7024 User’s Manual
2.13 $AA7
Description:
Perform 10V Calibration
Note
: The command is for CB-7021/21P only.
Syntax:
$AA7[CHK](cr)
$ Delimiter character
AA Address of setting module (00 to FF)
1 command for performing 10V calibration
Response:
Valid Command:
!AA[CHK](cr)
Invalid Command:
?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of response module (00 to FF)
Example:
Command: $017
Receive: !01
Perform address 01 10V calibration, returns successful.
Related Command
:
Sec. 2.10
$AA3VV
Related Topics
:
Sec. 1.9
Calibration