Measurement Computing CB-COM-7021 - Manual (Page 40)

40
CB-7021, CB-7022, CB-7024 User’s Manual
2.11 $AA4
Description:
Set PowerOn Value
Note
: The command is for CB-7021/21P only.
Syntax:
$AA4[CHK](cr)
$ Delimiter character
AA Address of setting module (00 to FF)
4 Command for setting PowerOn Value. Store the current
output value as PowerOn Value.
Response:
Valid Command:
!AA[CHK](cr)
Invalid Command:
?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of response module (00 to FF)
Example:
Command: #0100.000
Receive: >
Set address 01 output 0.0 mA, returns successful.
Command: $014 Receive: !01
Set address 01 PowerOn V alue, returns successful. The
module 01 will go to 0.0 mA with module power on.
Related Command
:
Sec. 2.7
#AA(Data)
Related Topics
:
Sec. 3.5
Analog Output