Legrand OR-205KAN9GB-MM User Manual
Page 69
OR-71601671
Page 62
27
Slide the crimp sleeve farther down the fiber to release the aramid yarn. Gently cut the aramid yarn
ensuring that it reaches the end of the connector body. Spread the aramid yarn evenly around the stem
of the connector. Slide the crimp sleeve down the fiber toward the connector. Ensure the crimp sleeve is
against the retaining ring at the rear of the connector body and strongly crimp the crimp sleeve using the
middle die (.128 hex) of the crimping tool.
Installation on jacketed fiber
ST
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09