Legrand OR-205KAN9GB-MM User Manual
Page 14
Installation: stripping 900 µm tight buffered fiber
(if using loose tube with breakout kit, skip to step 11)
Page 7
6
Strip approximately 40 mm of the 900 µm buffered fiber. Be sure to strip fiber in small (5 mm) sections to
avoid breaking it. Buffer end should be clean and square. After stripping, measure and mark the buffer
from its end as illustrated below.
*
If unfamiliar with stripping optical fiber, it is advised to practice using a spare piece of fiber.
15 mm
Fiber waste
11 mm
9 mm
LC
SC
ST
OptiMo Connector Installation Instructions
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09