Installation on jacketed fiber – Legrand OR-205KAN9GB-MM User Manual
Page 56
Page 49
OptiMo Connector Installation Instructions
Installation on jacketed fiber
Unacceptable cleaves
Acceptable cleave
Close stage and check fiber. It is recommended to rotate the fiber 90
0
- 180
0
to verify from different angles.
3
3
*
Note: Batteries are not required.
If the cleave is unacceptable, then the fiber must be re-prepared starting from step 5. If fiber or fiber endface appear
dirty, clean it as in step 11.
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09