Legrand 30TP Series - Manual

INSTALLATION INSTRUCTIONS
Wiremold Electrical Systems conform to
and should be properly grounded in com-
pliance with requirements of the current
National Code or codes administered by
local authorities.
All electrical products may represent a
possible shock or fire hazard if improperly
installed or used. Wiremold electrical
products are UL listed, made for interior
use in dry locations only and should be
installed in conformance with current local
and/or the National Electrical Code.
30TP-Series
Add-Ons For
Tele-Power
® Poles
Components Included: 1 Device Plate/1 Mounting Bracket/1 Cover Section
Add-On Covers
Communication Cables- No. of Pairs
No. of Cables
30% Fill
60% Fill
25
9
18
4
40
80
Communication Cables- No. of Pairs
No. of Cables
30% Fill
60% Fill
25
3
8
4
20
40
Wire Type
THHN,THWN
14 9
Size AWG
No. 12 No. 10
30TP-4
Communication Capacities
30TP-2
Communication Capacities
Power Capacities
Wire Type
THHN,THWN
48 30
Size AWG
No. 12 No. 10
Power Capacities*
Communications
Plate
30TC-CVR
Cover w/Bezel
Installed
30TC-3S2
One Gang
30TP-C
Rectangular
30TP-L
Single
(1.59 [40.39mm]
Diameter)
30TP-J
Single
(1.40 [35.56mm]
Diameter)
30TP-A
Duplex
30TP-B
*With surge/GFCI devices