Legrand E77378WHT3WB User Manual
Modular tele-power pole
E77378WHT3WB
Modular Tele-Power Pole
INSTALLATION INSTRUCTIONS
Wiremold Electrical Systems conform to and should
be installed and properly grounded in compliance
with requirements of the current National Electrical
Code, Canadian Electrical Code, or codes
administered by local authorities.
All electrical products may represent possible
shock or fire hazard if improperly installed or used.
Wiremold electrical products are UL listed, made for
interior use only, and should be installed in
conformance with current local and/or the National
Electrical Code.
TELEPHONE CABLES – NO. OF PAIRS
25
4
NO. OF CABLES
30% FILL
3
20
MAX FILL
7
40
The Wiremold Company
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
In Canada:
850 Gartshore Street • Fergus, Ontario N1M 2W8
1-800-741-7957 • FAX 519-843-5980
© Copyright 2002 The Wiremold Company All Rights Reserved
42291 – February 2002 – For latest specs visit www.wiremold.com
Consisting of:
E77378WHT3WB-P1 Pole 14'5" [439.42cm]
Entrance End Fitting: Switched Sign Power;
two IG Circuit Connector; Standard Power
Circuit Connector; two connectorized Power
Whips; Mounting Hardware.
F10062 IG Box w/7' [213.36cm] Whip
Two 125V, 15 Amp IG duplex receptacles;
connectorized power whip.
F10063 IG Box w/11' [335.28cm] Whip
Two 125V, 15 Amp IG duplex receptacles;
connectorized power whip.
F10064 Box w/11' [335.28cm] Whip
Two 125V, 15 Amp duplex convenience
receptacles; connectorized power whip.
2 1/4"
[57mm]
1"
[25mm]
1 1/4"
[32mm]
2 5/16"
[59mm]
– CAUTION –
Make sure Power is off
before installing these poles.
4. To power boxes, plug box whip
into corresponding connector
on pole. Match the three pin
whip to the three pin connector.
Match the four pin whips to the
four pin connectors.
- 25AM10FO 25DTC-ACT 25DTC-3S2 25DTC-CVR AMTC-ACT AMTC-3S2 AMTC-ACVR 2507C AMTPN-25DTPN TPB Gasketed Box 25DTPC AMTPC Series AMTC-CVR 291-H/BTC 292-H/BTC RC9-PPT RC92GHBTC RC91GHBTC RCAPFFTCBK RC9CFFTCBK RC9CFFTCGY RC9FFS RC9AFFTCBK RC9AFFTCGY RC9AFFTC v.2 880ADP FITFIT Multi-Service Poke-Thru Device Abandonments AP-FITTCFIT Multi-Service Poke-Thru Device Abandonments 221-21CARPET FIT Multi-Service Poke-Thru Device Abandonments 221-21TILE FIT Multi-Service Poke-Thru Device Abandonments RC9AFFTC v.1 6ATC 8AT 6PPS 68REC 68REC-25 6PPS 8 5PTHA 575CHA 175CHA-LJB 1BHA 152CHA 1BLH 175CHA 5BLH 1PTHA 1125CHA 15FFHA 682A 682A-PT 6S2 6ACT8A 6TRAC 6MAAP2A 6MOSBS 6DEC 6DP 6MOS 6B 6AAP 68B 6SER 6MAAP 6S1 68MAAP 6ATCFFBK 6ATCFFGY 6ATCFFNK 6ATCFFBS 6ATCFFBZ 895GFI 895TGFI 895 Series Floor Box Covers v.2 896 Series Floor Box Covers v.2 K/KP deQuorum Worksurface Portal Adapter Plate BZTPP Series RC3APTCBK RC3APTCGY RC4KTCBK RC4KTCGY RC4KTCVY RC4KTCAL RC4KTCBS RC4KTCAB RC9 Poke-Thru Series RC7APTCGY RC7APTCBK FS TS Whip-Ended TableSource Work Surface Modules TSAM1F1AL1U Whip-Ended TableSource Work Surface Modules TSAX1F1AL1U Whip-Ended TableSource Work Surface Modules TSAM1F2AL1U Whip-Ended TableSource Work Surface Modules TSAX1F2AL1U Whip-Ended TableSource Work Surface Modules TSAM1F0AL1U Whip-Ended TableSource Work Surface Modules TSAX1F0AL1U Whip-Ended TableSource Work Surface Modules TS2345AM1L1GYCM Whip-Ended TableSource Work Surface Modules TS2345AM1L1GYRT Whip-Ended TableSource Work Surface Modules TS2345AM1L2GYCM Whip-Ended TableSource Work Surface Modules TS2345AM1L2GYRT Whip-Ended TableSource Work Surface Modules TS2345AX1L1GYCM Whip-Ended TableSource Work Surface Modules TS2345AX1L1GYRT Whip-Ended TableSource Work Surface Modules TS2345AX1L2GYCM Whip-Ended TableSource Work Surface Modules TS2345AX1L2GYRT Whip-Ended TableSource Work Surface Modules RC7AFFTC RC7AFFTCBK RC7AFFTCGY RC7AFFTCAL RC7AFFTCBS RC7CFFTCBK RC7CFFTCGY RC7CFFTCAL RC7CFFTCBS AMD8 Communications Poke-Thru Device Adapter COM50 COM75 30TP Series