Legrand OR-205KAN9GB-MM User Manual
Page 58
Page 51
OptiMo Connector Installation Instructions
Max. 1mm
16
Carefully insert the bare fiber into the stem of the connector until you feel the fibers
make contact. Gently twisting the fiber may ease insertion. Do not twist or remove the
fiber once it is fully inserted. When fully inserted, the pen mark on the buffer should
be near the edge of the stem of the connector. Clamp the fiber into the clamp of the
installation tool. Must be a bow of approximately 15mm-20mm to maintain a contact
between the end faces of the fibers.
LC
SC
ST
Max. 2 mm
Pen mark
Installation on jacketed fiber
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09