Adjustable cleaver installation on jacketed fiber – Legrand OR-205KAN9GB-MM User Manual
Page 53
OR-71601671
Page 46
12
b
Cleave the fiber 7 mm from the end of the buffer. Be sure to read and understand the procedure
included with your cleaver that is provided with your Ortronics
®
Field Installation Kit prior to
attempting this step. (The procedure can be downloaded from the Ortronics web site at
)
Adjustable Cleaver Installation on jacketed fiber
*
If unfamiliar with cleaving, it is advised to practice using a spare piece of fiber. Generally, a light touch is all that is
required to score the fiber. The fiber buffer must be set to produce a 7 mm bare fiber length.
*
Alternative cleavers which produce a 7 mm bare fiber length may be used.
Fiber waste
+0.5
-0.0
+0.5
-0.0
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09