Legrand OR-205KAN9GB-MM User Manual
Page 61
OR-71601671
Page 54
19
Remove disposable tool and discard it. Gently pull the Kevlar towards the connector to make sure there is
no slack. Slide the crimp sleeve over the Kevlar. Spread the Kevlar evenly around the connector.
Carefully remove the connector from the installation tool. Ensure the crimp sleeve is against the rear of
the connector and strongly crimp the crimp sleeve using the middle die (.128 hex) of the crimping tool.
Now you can cut excess aramid yarn.
LC
Installation on jacketed fiber
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09