Installation on 900 µm buffered fiber – Legrand OR-205KAN9GB-MM User Manual
Page 19
Installation on 900 µm buffered fiber
Page 12
10
Use the microscope to check the quality of the cleave. Pointing the microscope at a white surface will
provide a brighter image.
2
2
Make sure fiber position is as illustrated.
Turn microscope over and place fiber on stage.
1
1
OR-71601671
*
Note: If the Ortronics
®
Precision Cleave Tool (OR-60300189) is used, cleave inspection with a microscope is not required.
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09