Installation on 900 µm buffered fiber – Legrand OR-205KAN9GB-MM User Manual
Page 20
Installation on 900 µm buffered fiber
Page 13
Unacceptable cleaves
Acceptable cleave
Close stage and check fiber. It is recommended to rotate the fiber 90
0
- 180
0
to verify from different angles.
3
3
*
Note: Batteries are not required.
If the cleave is unacceptable, then the fiber must be re-prepared starting from step 5. If fiber or fiber endface
appear dirty clean it as in step 6.
Once this step is successfully completed, proceed to step 11
OptiMo Connector Installation Instructions
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09