Legrand OR-205KAN9GB-MM User Manual
Page 34
Installation on 900 µm buffered fiber
Page 27
Pen mark
clamp
LC
SC
ST
Pen mark
OptiMo Connector Installation Instructions
Pen mark
23
Carefully insert the bare fiber into the stem of the connector until you feel the fibers
make contact. Gently twisting the fiber may ease insertion. Do not twist or remove
the fiber once it is fully inserted. When fully inserted, the pen mark on the buffer
should be near the edge of the stem of the connector. Clamp the fiber into the clamp
of the installation tool. There must be a bow of approximately 15mm-20mm (0.6in-
0.75in) as illustrated in the fiber in order to maintain a contact between the end faces
of the fibers.
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09