Installation on 900 µm buffered fiber, Lc sc st – Legrand OR-205KAN9GB-MM User Manual
Page 37
Installation on 900 µm buffered fiber
Page 30
LC
SC
ST
Remove disposable tool and discard it.
Holding the boot by its collar, align the anti
snag with the latch of the LC connector,
slide it onto the rear of the connector until
its step reaches the connector body. The
installation is now completed.
*
Be sure to clean the connector as described
in the “Cleaning Procedures” section before
using the connector.
Grab the disposable tool as shown. Pull
until a click is heard. Remove the tool and
discard it.
26
a
Align and press the rear housing with boot
into the front housing until a click is heard.
The installation is now complete.
*
Be sure to clean the connector as described
in the “Cleaning Procedures” section before
using the connector.
OR-71601671
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09