Legrand OR-205KAN9GB-MM User Manual
Page 48
Installation on jacketed fiber
Page 41
OptiMo Connector Installation Instructions
17 mm
8
a
For 2.0 mm to smaller than 2.4 mm cord
8
b
For 2.4 mm to 3.0 mm cord
6 mm
15 mm
4 mm
Make sure all the slack fiber is pushed back inside the
jacket. First mark the buffer at the end of the jacket.
Mark it again at 6 mm and 17 mm.
Make sure all the slack fiber is pushed back inside the
jacket. Insert the cord adapter as shown. First mark
the buffer at the end of the cord adapter. Mark it again
at 4 mm and 15 mm.
SC
SC
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09