Legrand OR-205KAN9GB-MM User Manual
Page 65
OR-71601671
Page 58
23
Slide the crimp sleeve farther down the fiber to release the aramid yarn. Gently pull the aramid yarn
towards the connector to make sure there is no slack. Slide the crimp sleeve over the aramid yarn.
Spread the aramid yarn evenly around the connector. Carefully remove the connector from the
installation tool. Ensure the crimp sleeve is against the rear of the connector and strongly crimp the
crimp sleeve using the middle die (.128 hex) of the crimping tool. Now you can cut excess aramid yarn.
Installation on jacketed fiber
SC
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09