Gasboy SiteOmat Users Manual - Manual (Page 98)

3. Select the tank from the adjacent drop-down list
4. Select the measurement data source, utilizing the radio buttons:
a. Manual, for manual readings (dip stick). In cases where this option is selected, the
Start data fields are not available and the user manually enters the End data,
namely the fuel levels after the delivery (see Figure 6-7)
b. TLG, for data obtained from TLG readings. In cases where this option is selected:
• Click on the Read button. The Wet Delivery TLG Reading dialog box
appears displaying a list of TLG readings from the relevant tank (see
Figure 6-8). Select a TLG reading by clicking on the relevant row and
click OK
• The delivery data is filled automatically, including Start and End readings
(see Figure 6-9)
5. Verify that all relevant fields (see Table 6-2) are filled and click OK to save the data and
return to the Wet Delivery Details dialog box
6. Click OK to save the changes and return to the Delivery screen
To delete the delivery data, click on the relevant delivery data row and click Delete.
Figure 6-7. Wet Delivery Detailed Data Entry Using Manual Source
SiteOmat User’s Manual– MDE 4818 94