Gasboy SiteOmat Users Manual - Manual (Page 68)

• Active status, meaning that its vehicles/departments are allowed to refuel (within the defined
limits), or in
• Blocked status, namely all its vehicles/departments are denied automatic refueling
To toggle between Active status and Block status of a fleet:
1. Click on the row of the applicable fleet in the grid (see Figure 5-13)
2. Click on the Active/Block… button
3. The status of the selected fleet is changed
5-6.6.2. Fleet Properties
This feature enables to modify the attributes of an existing fleet. Proceed as follows:
1. Click on the Properties button on the Local Management Fleets screen (see
Figure 5-13) to open a window identical to the one described in paragraph 5-6.1 (see
Figure 5-14)
2. Proceed as defined for a new fleet
3. Click OK to save the changes
5-6.6.3. Deleting a Fleet
To delete an existing fleet, perform the following procedure:
1. Click on a row in the fleet grid (see Figure 5-13) to select the fleet to be deleted
2. Click on the Delete button
3. The Delete procedure requires approval to implement the action
4. Click OK
NOTE
Deletion of a fleet can be performed only if all its
departments are deleted (see Figure 5-19).
Figure 5-19. Deleting a Fleet– Departments Delete Warning Message
5-6.6.4. Finding a Fleet
The user can either:
• Look for (Find) a fleet or
SiteOmat User’s Manual– MDE 4818 64