Gasboy SiteOmat Users Manual - Manual (Page 37)

4-4. REFUELING THROUGH SCREENS
The SiteOmat Controller enables users to remotely initiate and stop refueling transactions. The
start/stop refueling is done through the Status window (see Figure 4-2), by click on the pump head
icon, from which the refueling transaction should be performed.
NOTE
The remote refueling option is available only if
enabled in the setup of the SiteOmat Controller. For
more information about the setup of this feature,
refer to the SiteOmat In-House Installation &
Setup Manual.
4-4.1. Starting Refueling
To start a refueling transaction from a certain pump head, click on the applicable pump head icon in
the Status window. The SiteOmat presents a confirmation box, as seen in Figure 4-3.
Figure 4-3. Start Refueling Confirmation Message
In cases where the pump head is currently occupied with a refueling transaction, a proper
notification message is displayed (see Figure 4-4).
Figure 4-4. Pump Busy Message
In cases where the pump head is available for refueling, the SiteOmat prompts for the money or
volume limit for the requested refueling, as seen in Figure 4-5. Enter the applicable money/volume
value and click Money or Volume, accordingly.
SiteOmat User’s Manual– MDE 4818 33