Gasboy SiteOmat Users Manual - Manual (Page 132)

• Foreign key (relevant for fueling process starting not only with Fuel Ring)
If during a fueling process, the SiteOmat recognizes different devices on the same channel, the
transaction is stopped immediately without any resume option. The transaction is completed
only when the driver handles the nozzle down. The transaction is charged to the first device
only.
• Satellite
This option enables refueling two tanks in the truck simultaneously utilizing two nozzles on the
same pump. SiteOmat starts fueling when one of them is authorized. The transaction is stopped
only when both nozzles lose channels. The two tanks can have one device number for both of
them (Fuel Ring) or different numbers (FuelOpass). Currently the satellite option controls only
one valve. When working with a FuelOpass connected to a Datapass device (for odometer or
engine hours reading) the driver need to start the refuel process from the master tank in order to
send the truck data to the FCC and the FHO.
9-2.2.3. OrTR - Tag reader scenario (Without swipe)
The OrTR has a two lines display with 16 characters. No Keyboard or magnetic card devices are
used.
The scenario below is relevant only when the OrTR reader is connected to one pump only.
The main welcome message is:
Welcome
Present Your Tag
After approving the tag, the message changes to:
Please start
Fueling
In cases where the device is not authorized, a message is displayed for five seconds. Afterwards the
welcome message is displayed again.
Tag not
Authorized
If a driver presents a tag during a fuel process, the following message is displayed:
Pump In use
In two stages scenario after authorization, the first tag system displays a message according to the
first tag. The fueling authorization is provided only after the approval of the two tags.
If first tag is a driver tag, the following message is presented:
SiteOmat User’s Manual– MDE 4818 128