Figure 5-11. group rule properties – general tab – Gasboy SiteOmat Users Manual User Manual

Page 60

Figure 5-11. Group Rule Properties – General Tab

4. Select the Detail tab

5. In the Detail window (see Figure 5-12), select the rules to be included in the Group Rule,

out of the defined rules (one rule of each type maximum)

NOTE

There is no need to enter limits in all the text boxes.
It depends on the kind of limit to be applied.
However, at least one rule must be defined.

6. Click OK to save changes and close the window

SiteOmat User’s Manual– MDE 4818