Gasboy SiteOmat Users Manual - Manual (Page 51)

Figure 5-3. Rules Main Screen
5-4.1. Creating a New Rule
To create a new rule, follow the instructions below:
1. Click on the New button on the Local Management Rules screen
2. The Rule Properties window appears (see Figure 5-4). The New Rule window consists of
two tabs: General and Detail. While the General tab is fixed, the contents of the Detail tab
changed depending upon the selected rule type
3. Select the desired rule type from the drop-down list
4. Enter a descriptive name and a description for the rule
5. Select the Detail tab. The Detail tab for each rule type is described in the following
paragraphs:
• Time Range Rule - Paragraph 5-4.1.1
• Limits Rule - Paragraph 5-4.1.2
• Visits Rule - Paragraph 5-4.1.3
• Fuel Rule - Paragraph 5-4.1.4
SiteOmat User’s Manual– MDE 4818 47