Gasboy SiteOmat Users Manual - Manual (Page 29)

3-4. NAVIGATING THROUGH THE SITEOMAT
After successful login, the opening screen (see Figure 3-3) appears. When entering the program for
the first time, the opening screen appears after the system data is uploaded (it may take a few
seconds). Meanwhile the following message appears (see Figure 3-2):
Figure 3-2. Updating Data Message
The SiteOmat interface includes three sections:
a. Navigation Bar – Accessing the various capabilities of the SiteOmat application is done using
the Navigation Bar on the left-hand side of the window. The Navigation Bar appears throughout
the SiteOmat application and contains buttons, which lead to the various screens of the
application within the boundaries of the user’s clearance level
b. Alarm Line– The alarm line is constantly displayed on the bottom of the window, indicating
the most critical fault in the system
c. Work Area – The main user interface located in the center of the screen
NOTE
The login name of the current user is displayed in
the information bar at the bottom of the screen
"Login User Name" (see Figure 3-3).
Clicking on a button in the Navigation Bar opens the subsequent contents in the work area; while
the Navigation Bar is fixed, the work area is dynamic and changes according to the requested
option. The objective of each button in the Navigation Bar is depicted as follows (see Table 3-1):
Table 3-1. Navigation Bar Buttons
Button Description
SiteOmat User’s Manual– MDE 4818 25