Gasboy SiteOmat Users Manual - Manual (Page 34)

b. Pump Head On-Line Data × 8 for each group (total of 32)
c. Fueling Transactions History Log
4-3.1.1. Pump Heads Gauge
The four Pump Heads Gauges (see Figure 4-2) serve two functions:
a. Switching between the four groups of eight pump heads, by clicking on the applicable
gauge:
1. First (leftmost) Gauge: Pump heads 1 to 8
2. Second Gauge: Pump heads 9 to 16
3. Third Gauge: Pump heads 17 to 24
4. Forth Gauge: Pump heads 25 to 32
b. Indicating whether a fueling transaction is currently performed in one of the pump heads.
The gauge contains eight indicators, each representing a pump head (the leftmost is the first
pump head in the group and the rightmost is the last one). The color indications are as
follows:
1. Gray: No pump head is assigned to the indicator
2. Blue: The pump head is Idle – awaiting fueling request
3. Yellow: The pump head is in Call status – the fuel nozzle was lifted
4. Purple: The pump head is in Ready status – fueling was authorized but the
nozzle was not lifted yet
5. Green: The pump head is in In-Use - fuel is being dispensed; or Pay status -
the transaction is completed and the transaction is being charged
6. Orange: Fueling was stopped (e.g.: fuel limit is reached, or fueling is stopped in
automatic fueling, in cases where the nozzle was taken out of the vehicle fuel inlet
during the fueling)
7. Red: A problem of some sort occurred (i.e. error in pump, communication
error)
NOTE
The color indicators display the status of all the
pump heads, even though the Status window only
shows eight pump heads each time.
4-3.1.2. Pump Head On-Line Data
SiteOmat User’s Manual– MDE 4818 30