Gasboy SiteOmat Users Manual - Manual (Page 35)

The Pump Head On-Line Data is displayed in five text boxes and two indicators. The fueling
process is viewed in real-time, as if watching the display on the fuel pump. The textual information
displayed on-line is as follows:
a. USD: The amount of money, which should be collected for the fuel dispensed so
far
b. Gallon: The fuel volume dispensed so far
c. Emp/Veh: The Employee name or plate number of the vehicle being fueled
d. Nz: The number of the nozzle dispensing the fuel
e. Fleet: The number of the fleet, to which the fueled vehicle belongs
4-3.1.2.1. Pump Head Indicator
The pump head indicator displays the number of the pump head. The following states are displayed
by the pump head color indicator:
 Red: The pump head is not defined
 Green: The pump head is monitored
 Black: The pump head is blocked (deactivated)
4-3.1.2.2. Nozzle Indicator
The nozzle indicator displays the state of the nozzle of each pump head. The nozzle icon changes
according to the nozzle state, as follows:
a. Idle – awaiting fueling request
b. Call status – the fuel nozzle was lifted
c. In-Use – fuel is being dispensed
d. Pay status – transaction is completed and money is collected
e. Ready – fueling was authorized but the nozzle was not lifted yet
f. Stop – Fueling is stopped (e.g. nozzle is pulled out before fueling was completed)
g. Attention – A problem of some sort occurred (i.e. pump in error, communication error)
SiteOmat User’s Manual– MDE 4818 31