D-Link DES-3326 - Manual (Page 247)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
To make a static DNS table entry:
Click the Static Setup link on the DNS Relay menu:
Figure 7-69. DNS Relay Setup window
The following fields can be set:
Parameter Description
Domain Name The domain name of the static DNS
table entry.
IP Address
<0.0.0.0> The IP address of the domain name
above.
Status <Enabled> This field can be toggled using the
space bar between Enabled and
Disabled.
Network Monitoring
The DES-3326 provides extensive network monitoring capabilities that can be viewed from the under
Network Monitoring menu.
Network monitoring on the switch is divided into Layer 2 and Layer 3 functions, depending upon which
operating mode the switch is in. Layer 2 network monitoring functions are visible on the console when
the switch is in Layer 2 Only operating mode. Layer 3 network monitoring functions are added to the
console when the switch is in IP Routing operating mode.
Layer 2 Network Monitoring
Layer 2 network monitoring consists of the following screens or menus:
Statistics
• Port Utilization
• Port Error
247