Multicasting, Layer 2 multicast setup, Igmp snooping settings – D-Link DES-3326 User Manual

Page 133

Text mode
Original mode

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide

applies only when the destination field is OSPF.

Metric:[ ]

Allows the entry of an OSPF interface cost. This is
analogous to a Hop Count in the RIP routing protocol.

Multicasting

Layer 2 Multicast Setup

To setup Multicasting on the switch, when the switch is in Layer 2 operating mode, highlight
Multicasting from the Main Menu and press Enter.

Figure 6-50. Multicasting Menu

IGMP Snooping Settings

To configure IGMP Snooping, highlight IGMP Snooping Settings from the Multicasting Menu and
press Enter.

Figure 6-51. IGMP Snooping Settings screen

IGMP Snooping can be globally enabled or disabled from the IGMP Snooping Settings screen.

133