D-Link DES-3326 - Manual (Page 112)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Setup IEEE 802.1Q Multicasting Forwarding
Setup IP Multicasting
Multicast Interface Configuration
IGMP Interface Configuration
IGMP Static Member Configuration
DVMRP Interface Configuration
PIM-DM Interface Configuration
Setup Static Router Port
VLANs VLAN Menu
Edit 802.1Q VLANs
Configure 802.1Q Port Settings
Link Aggregation Link Aggregation
Layer 3 IP Networking Setup Layer 3 – IP Networking
Setup IP Interface
MD5 Key Table Configuration
Setup RIP Configuration
RIP Configuration
Setup RIP
Setup OSPF
OSPF Area Setting
OSPF Interface Configuration
Virtual Interface Configuration
Area Aggregation Configuraion
Route Redistribution Settings
Table 6-2. Console Screen Hierarchy
Advanced Setup
Changing switch operation mode setting changes some of the menus and configuration options for the
Advanced Setup of the switch. The configuration data for each mode is, however, saved when the
switch’s operating mode is changed.
Configuring VLANs
The switch allows the assignment of an IP interface to each VLAN, in IP Routing
mode. The VLANs must be configured prior to setting up the IP interfaces.
VLANs by Switch Operating Mode
To create a new 802.1Q VLAN:
112