D-Link DES-3326 - Manual (Page 13)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
• Hardware-based Layer 3 IP switching.
• IP packet forwarding rate of 6.6 Mpps.
• 2K active IP address entry table per device.
• Supports RIP – (Routing Information Protocol) version I and II.
• Supports OSPF − (Open Shortest Path First)
• Supports MD5 and Password OSPF Packet Authentication
• Supports IP version 4.
• IGMP version 1 and 2 support (RFC 1112 and RFC 2236).
• Supports PIM Dense Mode.
• Supports DVMRP.
• Supports IP multi-netting.
• Supports IP packet de-fragmentation.
• Supports Path MTU discovery.
• Supports 802.1D frame support.
Traffic Classification and Prioritization
• Based on 802.1p priority bits
• 4 priority queues
Management
• RS-232 console port for out-of-band network management via a console terminal or PC.
• Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of
network loops.
• SNMP v.1 Agent.
• Fully configurable either in-band or out-of-band control via SNMP based software.
• Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the
console.
• Built-in SNMP management:
Bridge MIB (RFC 1493)
MIB-II (RFC 1213)
Mini-RMON MIB (RFC 1757) – 4 groups
CIDR MIB (RFC 2096), except IP Forwarding Table.
13