D-Link DES-3326 - Manual (Page 164)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
To configure the BOOTP/DHCP Relay interface, highlight BOOTP/DHCP Relay Interface
Configuration from the BOOTP/DHCP Relay menu and press Enter.
Figure 6-86. BOOTP/DHCP Relay Interface Configuration screen
The following fields can be set:
Parameter Description
Action:<Add> This field can be toggled between
Add and Delete using the space bar.
Toggle to Add and enter the subnet
name for which BOOTP Relay will be
active.
Interface Name:[
]
The interface name of the IP interface
on which the BOOTP or DHCP
servers reside.
IP Address: Displays the IP address
corresponding to the subnet name
entered above.
BOOTP/DHCP
Server:[ ]
Allows the entry of IP addresses for
up to four BOOTP or DHCP servers.
DNS Relay
To enter the IP addresses of DNS servers (for the DNS Relay service):
Highlight DNS Relay on the Switch Utilities menu and press Enter.
164