D-Link DES-3326 - Manual (Page 165)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Figure 6-87. DNS Relay screen
The following fields can be set:
Parameter Description
DNSR Status
<Disabled> This field can be toggled between
Disabled and Enabled using the
space bar, and is used to enable or
disable the DNS Relay service on the
switch.
Name Server:[1][2] Allows the entry of the IP address of
a primary (number 1) and a
secondary (number 2) domain name
server (DNS).
DNSR Cache
Status:<Disabled> This can be toggled between Disabled
and Enabled. This determines if a
DNS cache will be enabled on the
switch.
DNSR Static Table
Lookup
Status:<Disabled>
This field can be toggled using the
space bar between Disabled and
Enabled. This determines if the static
DNS table will be used or not.
To make a static DNS table entry:
Select Static table configuration on the DNS Relay menu and press Enter.
165