D-Link DES-3326 - Manual (Page 138)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
.
Figure 6-56. Multicast Interface Configuration screen
This menu allows the assignment of a multicast routing protocol to an IP interface. The IP interface
must have been previously configured on the switch.
In addition, IGMP may be enabled or disabled for the selected IP interface.
The available multicast protocols are the Protocol Independent Multicast – Dense Mode (PIM-DM),
and the Distance-Vector Multicast Routing Protocol (DVMRP).
INACT is not a multicast routing protocol. It is used to make a given interface inactive for IP Multicast
routing and can still route IP traffic.
Parameter Description
Interface Name:[
]
Allows the entry of the name of the
IP interface that is to be configured
for multicasting. This must be a
previously configured IP interface.
IGMP: <Enabled> This field can be toggled between
Enabled and Disabled using the
space bar. This will enable or disable
IGMP for the IP interface entered
above.
Protocol: <INACT> This field can be toggled between
Protocol Independent Multicasting
– Dense Mode (PIMDM), Distance
Vector Multicasting Routing
Protocol (DVMRP), and INACT
(inactive). INACT is not a multicast
routing protocol. It is used to make a
given interface inactive for IP
Multicast routing yet can still route
IP traffic.
138