Priority – D-Link DES-3326 User Manual
Page 233
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Priority
To configure a forwarding priority for a given MAC address:
Click the Priority link on the Configuration menu:
Figure 7-48. Setup MAC Address Priority window
The following fields can be set:
Parameter
Description
MAC Address
Allows the entry of the MAC address
of the station for which priority
queuing is to be specified.
VID
Allows the entry of the VLAN ID (VID)
of the VLAN to which the MAC
address below is a member of.
Level <Low>
This field can be toggled using the
pull-down menu between Low, Med-L
(Medium Low), Med-H (Medium
High), and High, corresponding to
the priority of packets sent to or
transmitted from the MAC address
entered above.
State <Src>
This field can be toggled using the
pull-down menu between Src
(Source), Dst (Destination), and
Either, corresponding to whether the
MAC address entered above will be
transmitting packets (a source),
receiving packets (a destination) or
both (either).
233