D-Link DES-3326 - Manual (Page 235)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Figure 7-50. Filter Address Setup window
The following fields can be set:
Parameter Description
Address <0.0.0.0> Allows the entry of an IP address to
be filtered from the switch.
State <DstAddr> This field can be toggled between
SrcAddr (source), DstAddr.
(destination), and DstSrcAddr. The IP
address entered into the filtering
table can be filtered as a source
(packets will not be received from the
IP address), as a destination (packets
will not be transmitted to the IP
address), or as either a source or
destination (packets will not be
received from or transmitted to the IP
address.
Forwarding
Layer 2 Forwarding
To enter a MAC address into the switch’s forwarding table:
Select Forwarding on the Configuration menu, choose MAC Forwarding, and click MAC Address
Forwarding:
235