D-Link DES-3326 - Manual (Page 203)

DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Figure 7-14. Serial Port Settings window
Use the Select Protocol pull-down menu to select either the Console or the SLIP protocol.
The following fields can then be set:
Console Settings
Parameter Description
Baud Rate Displays the serial bit rate used to
communicate with a management
station. The console baud rate is
9600 bits per second.
Data Bits Displays the number of bits that
make up a word when
communicating with the
management station. The console
interface uses 8 data bits.
Stop Bits Displays the number of bits used to
indicate that a word has been
completely transmitted. The console
interface uses 1 stop bit.
Auto-Logout This sets the time the interface can
be idle before the switch
automatically logs-out the user. The
options are 2 mins, 5 mins, 10 mins,
15 mins, or Never.
SLIP Settings
Parameter Description
Baud Rate Sets the serial bit rate that will be
used to communicate the next time
203