Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 90)

E-STOP/DEADMAN RECOGNITION
E-Stop and Deadman recognition is done in every
module (Figure 11.1). The E-STOPS button activates
(turns red) when the VAC senses that an E-Stop is
pressed.
Deadman recongition is also done in every module
when enabled. The DEADMAN button under normal
operation will appear green, but when the VAC senses
that the Deadman has been tripped, the button will
change to red.
Figure 11.1: E-Stop & Deadman recognition
83
11
E-STOP & DEADMAN RECOGNITION