Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 61)

CREATE PRESET
Name Preset
After selecting CREATE PRESET from the main menu,
type a name for the new preset using the Daktronics
keyboard or the virtual keyboard (Figure 8.2). A
preset name can only be made of letters and numbers
(max 25). Typing a name activates
the ACCEPT button.
After entering the name, touch ACCEPT to confirm it.
Touch DECLINE to go back to the main menu without
creating the preset.
A preset contains two pieces of information for
every motor: when it is moved and where it is
moved to (Figure 8.3). The motors move sequentially
in the listed order. The target value on the right column
is the position the motor will be moved to.
Note: Motors will move at the factory default speed.
Note: Grouped motors cannot be moved in
a preset.
Figure 8.3: Example preset.
Figure 8.2: Name preset virtual keyboard.
54